flowchart LR
subgraph design["Design"]
b1("File Prep: Raster") --> b2("File Prep: Vector")
end
subgraph project["Projects"]
p1("Project 1: Design and cut a nametag")
p2("Project 2: Two Layer Cut-away Card")
p3("Project 3: HTV and Registration Marks")
p1 --> p2 --> p3
end
a("Concept") ---> design ---> c("Tool Specific Software") ---> d("The Tool") ---> project
click a "/VOW/vinyl-cutting/" "You are here!" _self
click b1 "/VOW/vinyl-cutting/file-prep" "This is a link to the design page." _blank
click b2 "/VOW/vinyl-cutting/file-prep" "This is a link to the design page." _blank
click c "/VOW/vinyl-cutting/software-tool" "This is a link to the tool specific software page" _blank
click d "/cow/shops/3d_printing/cricut" "This is a link to information about the cricut" _blank
click p1 "/VOW/vinyl-cutting/p1" "This is a link to the Project page" _blank
click p2 "/VOW/vinyl-cutting/p2" "This is a link to the Project page" _blank
click p3 "/VOW/vinyl-cutting/p3" "This is a link to the Project page" _blank
classDef basicNode fill:#78cdd1,stroke:#7c7e7f,stroke-width:2px;
classDef hereNode fill:#f37322,stroke:#7c7e7f,stroke-width:4px;
class a hereNode
class b basicNode
class b1 basicNode
class b2 basicNode
class c basicNode
class d basicNode
class p1 basicNode
class p2 basicNode
class p3 basicNode
classDef basicGraph fill:#7c7e7f,stroke:#78cdd1,stroke-width:2px;
classDef hereGraph fill:#7c7e7f,stroke:#f37322,stroke-width:4px;
class design basicGraph
class project basicGraph
¶ Three projects to help you understand the basic capabilities of the Cricut Maker and how to use them.
Project 1: Make a Nametag or Sticker and Transfer it to a Hard Surface
Project 2: Two Layer Cut-away Card
Project 3: HTV Design with Registration Marks
These projects are designed for the self guided learner and build upon each other. Even if you already know how to do vinyl cutting on a different machine, you should start with the first project in order to get acquainted with the Cricut Design Space interface.
If you need more help than the project instructions provide–or just need a refresher after you’ve done the projects–there are detailed guides for specific tasks available. Check the back of this packet, binder, or where other resources are located in the space!
Happy learning!