The following page acts as an introduction to the Creality CR-30 3DPrintMill.
A membership or day pass is required to access 3D Printing.
The Creality CR-30 3DPrintMill is not yet available for member use!
You can make machine reservations in the following ways:
Open Works recommends slicing your file before making a machine reservation. The slicer will provide a time estimate which you may use to accurately book your reservation.
The CR-30 3DPrintMill is unique as one of the few 3D printers available that features a conveyor belt style print bed. The benefit of this design is both the capability of printing extra long prints and the ability to easily batch print. The print head prints at a 45 degree angle which can create issues in prints such as gaps in shapes, and uneven extrusion. The CR-30 3DPrintMill is recommended for the advanced 3D printing user.
Number of Machines | Name | Material | Max Print Size | Recommended Slicer | File Format | Manual or Automatic Leveling? |
---|---|---|---|---|---|---|
2 | Ender-3 V2 | PLA or PETG | 8" x 8" x 9" | Cura | .gcode/STL | Manual |
2 | Ender-3 V3 SE | PLA or PETG | 8" x 8" x 9" | Cura | STL/OBJ/AMF | Automatic |
1 | CR-30 3DPrintMill | PLA or PETG | ∞" x 7" x 6" | Crealitybelt | STL/OBJ/AMF | Semiautomatic |
1 | LD-002H | UV curing resins | 3" x 5" x 6" | Lychee | STL/CTB | Manual |
¶ Acceptable Materials:
PLA
¶ Use with Caution and Proper Technique:
PETG
¶ FORBIDDEN MATERIALS :
ABS
Nylon
TPU
Personal Protective Equipment (PPE):
• As in all of the shops, sturdy, close-toed shoes must be worn at all times for traction and stability.
For more information on shop safety visit 3D Printing under "Safety."
All machine maintenance pages are only accessible to Staff. All machine maintenance is only to be done by Staff.
All troubleshooting pages are only accessible to Staff. All troubleshooting is only to be done by Staff.
Click here to report any consummables needing to be replenished within 3D Printing!