The following page is intended as an introduction to the Creality Ender-3 V3 SE 3D printers.
A membership or day pass is required to access 3D Printing.
The workshop 3D Printing provides additionl training, but is not required to operate the Ender-3 V3 SE.
You can make machine reservations in the following ways:
Open Works recommends slicing your file before making a machine reservation. The slicer will provide a time estimate which you may use to accurately book your reservation.
The Creality Ender-3 V3 SE 3D printers use a heated extruder and a gcode file to print three-dimensional objects with PLA filament. 3D prints can be used as a step in the prototyping process, or they can be created as finished sculptural objects in their own right.
Number of Machines | Name | Material | Max Print Size | Recommended Slicer | File Format | Manual or Automatic Leveling? |
---|---|---|---|---|---|---|
2 | Ender-3 V3 SE | PLA or PETG | 8" x 8" x 9" | Cura | STL/OBJ/AMF | Automatic |
1 | CR-30 3DPrintMill | PLA or PETG | ∞" x 7" x 6" | Crealitybelt | STL/OBJ/AMF | Semiautomatic |
1 | LD-002H | UV curing resins | 3" x 5" x 6" | Lychee | STL/CTB | Manual |
¶ Acceptable Materials:
PLA
¶ Use with Caution and Proper Technique:
PETG
¶ FORBIDDEN MATERIALS :
ABS
Nylon
TPU
Personal Protective Equipment (PPE):
• As in all of the shops, sturdy, close-toed shoes must be worn at all times for traction and stability.
For more information on shop safety visit 3D Printing under "Safety."
All machine maintenance pages are only accessible to Staff. All machine maintenance is only to be done by Staff.
All troubleshooting pages are only accessible to Staff. All troubleshooting is only to be done by Staff.
Click here to report any consummables needing to be replenished within the [Shop Name!]
%%TERM
%%definition/description of term