Instructions to %%DO A THING
A membership or day pass is required to access 3D Printing. The following Workshop instructs users on the basics of 3D printing, but is not required:
The Creality CR-30 3DPrintMill is not yet available for use!
You can make machine reservations in the following ways:
Personal Protective Equipment (PPE):
• Sturdy, close-toed shoes must be worn at all times.
• Long hair, jewelry, and loose clothing must be tied back.
• Safety glasses and earmuffs must be worn while machines are running.
• A dust mask or a NIOSH certified respirator is recommended.
Do not do ___
Important point!
Warning
For more information on shop safety visit [applicable shop](applicable shop link) under "Safety."
insert image here
insert note, warning, error here
insert image here
insert note, warning, error here
insert image here
insert note, warning, error here
%%link to the next step