Open Works has several Stationary Sanders. You must complete Wood Shop 1 before using the machines.
The stationary sanders are used for sanding solid or composite wood. Adjustments can be made to the table angle or spindle size. If you are unsure how to make an adjustment, ask a Community Technician for help.
Drum sander
Edge sander / horizontal belt sander
Spindle sander
Vertical belt & disc combination sander
Name | Model | Best For |
---|---|---|
Disc sander | Jet JSG-6CS, 6" x 48" Belt / 12" Disc | Small or narrow pieces that will be sanded on the edge or end and need the sanded edge perpendicular to the face |
Drum sander | Powermatic PM2244 | Wide and long pieces that will be sanded on the face |
Edge sander | Jet OES-80CS Oscillating 6" x 89" Belt Edge | Wide or long pieces that will be sanded on the edge |
Spindle sander | Jet OOS-5, Benchtop Oscillating Spindle | Concave and convex curves and the insides of holes |
Vertical belt | Jet JSG-6CS, 6" x 48" Belt / 12" Disc | Small or narrow pieces that will be sanded on the edge or end |
• hardwoods
• softwoods
• composites
Open Works allows but does not encourage the use of reclaimed wood. Any reclaimed wood must be inspected by the member with a metal detector (provided) and reviewed by a Community Technician before processing.
The following materials are NOT permitted in the Wood Shop:
• Reclaimed wood containing metal
• Materials containing or coated with lead or lead-based paint
• Any pre-finished woods (for example: finished flooring, old bar tops, etc.)
• Pressure treated wood
• Foam
• Metal
• Glass
• PVC and vinyl
You do not need to reserve these machines.
Safety Check:
Sturdy, close-toed shoes must be worn at all times.
Long hair, jewelry, and loose clothing must be tied back.
Safety glasses must be worn while machines are running.
A dust mask or a NIOSH certified respirator is recommended.
For more information on shop safety visit Wood Shop under "Safety."
Use both hands to maneuver material.
Keep hands at least 4" away from the sanding surface.
Sanders are friction tools. They want to grab your work piece and your fingers and pull them into the machine.
Disc and Vertical Belt Combination Sander
Drum Sander Instructions adapted from the manual available here.
Edge Sander Instructions adapted from the manual.
Spindle Sander Instructions adapted from the manual.
Vertical Belt and Disc Sander Instructions adapted from the manual.