All found or reclaimed material must be checked for metal before being used in the wood shop. This is to prevent damage to the machines, injury to members, and, if using the table saw, activating the SawStop mechanism.
A membership or day pass is required to access the Wood Shop. And of the wood shop classes Wood 1, Wood 2, or Wood 3 allow you to use this tool
You do not need to reserve this tool.
Safety Check:
Sturdy, close-toed shoes must be worn at all times.
Long hair, jewelry, and loose clothing must be tied back.
Safety glasses and earmuffs must be worn while machines are running.
A dust mask or a NIOSH certified respirator is recommended.
For more information on shop safety visit Digital Fabrication under "Safety."
The sensor part of the metal detector is at the end of the wand, on the opposite end from the grip and is the entire area between the tip and the ridged part.
¶ Metal Detector Alerting