Personal Protective Equipment (PPE):
• Sturdy, close-toed shoes must be worn at all times.
• Latex gloves are recommended whenever handling ink.
For more information on shop safety visit Digital Textiles under "Safety."
The product has a low ink alert system. The accuracy of this system depends on the user refilling the ink tanks correctly. The product cannot directly measure the ink levels in the tanks; instead it estimates the amount of ink remaining by internally monitoring ink usage. The low ink alert system may generate inaccurate messages if the ink tanks are not refilled according to these instructions.
As a precaution, perform regular visual inspections of the ink tanks to ensure ink levels do not fall below the lower line. Continued use of the product when the ink level is below the lower line on the tank could damage the product.
Keep ink bottles and the ink tanks out of the reach of children. Do not allow children to drink from or handle the ink bottles and bottle caps.
Do not tilt or shake an ink bottle after opening it; otherwise, ink may leak.
If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out immediately. Seek medical advice if problems persist.
Do not squeeze the ink bottles.
Use ink bottles with the correct part number for this product.
Epson's warranties do not extend to any damage caused by the use of third-party ink or ink not designed for your printer.
This product requires careful handling of ink. Ink may splatter when the ink tanks are filled or refilled with ink. If ink gets on your clothes or belongings, it may not come off.
Do not open the ink bottle package until you are ready to fill an ink tank. Ink bottles are vacuum packed to maintain reliability. If you leave an ink bottle unpacked for a long time before using it, print quality may be affected.
Epson recommends filling an ink tank to the upper line before resetting the ink level.
After bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least three hours before using it.
Use the ink bottle before the date printed on the package.
After opening an ink bottle, Epson recommends using it as soon as possible.
Store ink bottles in a cool, dark place.
Store the ink bottles in the same environment as the product. When storing or transporting an opened ink bottle, do not tilt the bottle and do not subject it to impacts or temperature changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink bottle upright when tightening the cap, and take measures to prevent ink from leaking when you transport the bottle.
To maintain optimum print head performance, some ink is consumed from all ink tanks during printing and when performing maintenance operations, such as cleaning the print head.
The ink bottles may contain recycled materials, but this does not affect product function or performance.
The specification and appearance of the ink bottles are subject to change without prior notice for improvement.
When printing in monochrome or grayscale, color ink may be used instead of black ink, depending on the paper type or print quality settings. This is because a mixture of color inks is used to create black.
You can continue to use the product even if one or more ink tanks are not filled all the way. However, for the most accurate ink level monitoring, fill all the ink tanks up to the top line.
Turn on your product.
Open the ink tank cover.
Open the cap for the ink tank you are going to fill.
Gently shake the ink bottle in its package for about 5 seconds.
Unpack the ink bottle.
Hold the ink bottle upright and slowly turn the bottle cap to remove it.
Do not squeeze the bottle. Do not touch the top of the bottle after its cap is removed.
If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out immediately. Seek medical advice if problems persist. Keep the ink bottles out of the reach of children and do not drink the ink.
Position the top of the ink bottle along the slot in front of the filling port, then slowly stand the bottle up to insert it.
Wait for the ink to fill the tank. Do not squeeze the bottle. Ink flows into the tank and stops automatically when the ink is filled to the upper line.
If ink does not flow from the bottle, lift and reinsert the bottle.
When the ink tank is full, remove the ink bottle.
If any ink remains in the bottle, replace the bottle cap and tighten it. Store the bottle upright for later use.
Securely close the ink tank cap so it lays flat.
Repeat the previous steps as necessary for each ink tank you need to refill.
Close the ink tank cover.
Follow the on-screen instructions to reset the ink level for the colors you refilled.
You have successfully refilled the ink on the Epson SureColor F570!