Instructions to load roll paper on the dye sublimation printer.
Personal Protective Equipment (PPE):
• Sturdy, close-toed shoes must be worn at all times.
For more information on shop safety visit Digital Textiles under "Safety."
Grip the locking latch and fully open the top loading hatch.
Remove the bar which holds the roll paper. There is a fixed side and an adjustable side, the fixed side is the black plastic stopper, and the adjustable side is the clear plastic stopper.
Slide the clear stopper off of the bar.
Slide on your media roll. Make sure the media is going over top the roll.
Make sure the media roll is flush with the black stopper.
The media roll should be flush with both stoppers.
Slot the bar back into the printer with the roll paper loaded.
Take the end of the paper and feed it into the printer.
Roll the paper forward, through the white bearings, until the printer beeps. The beeps are the signal to stop.
Close the top loading hatch.
On the touchscreen confirm which paper you have loaded into the printer. If the settings are all correct you can press "OK."
You have successfully loaded roll paper on the Epson SureColor F570!
From the home screen, select "Paper Setting."
Select "Roll Paper."
Select "Remove."
The printer will unlock the roll paper.
Lift up the first half of the top loading hatch. Grip the locking latch and fully open the top loading hatch.
Roll the paper backwards so that the end of the paper is outside of the printer.
Remove the roll and remove the clear plastic end cap.
Pull the paper roll off of the bar.
Repeat steps 5-11 from the "Load Roll Paper on the Epson SureColor F570 SOP."
You have successfully changed roll paper on the Epson SureColor F570!
On the touchscreen select "Settings."
Select "General Settings."
Select "Printer Settings."
Select "Custom Paper Setting."
A submenu will open with ten different custom paper setting slots.
Select a slot and you will enter the menu for setting your custom paper settings.
You can name this setting if it is a preset you will be reusing.
From "Advanced Media Setting" you can make specific adjustments to your printer.
Once you have your settings in place you can hit the "Home" button on the touchscreen to return to the homepage.
From the homepage select "Paper Setting," and then select "Roll Paper."
Scroll down and select "Change Paper Type."
Select "Paper Type" and a submenu will open with your available custom paper settings slots. Select your paper type.
After you have selected your paper type you can hit the "Home" button and return to the homepage.
You have successfully loaded a custom paper type on the Epson SureColor F570!