In order for the laser to focus correctly, it must be set at the correct height above your material. This is known as homing the Z axis or setting the Z origin. Use the keypad to jog the laser head over the center of the piece.
A membership or day pass is required to access the shop.
Laser 1 Shop Safety is required to use the Boss Laser Cutter.
Safety Check:
Sturdy, close-toed shoes must be worn at all times.
Long hair, jewelry, and loose clothing must be tied back.
Safety glasses and earmuffs must be worn while machines are running.
A dust mask or a NIOSH certified respirator is recommended.
For more information on shop safety visit Digital Fabrication under "Safety."
5-10 minutes