¶ Introduction
The glass and acrylic cutter is used for cutting sheets of material that can crack when scored.
This tool is not in use and requires operator knowledge to setup and use. There is no training available for it.
¶ Skills/Class Required
A membership or day pass is required to access the Wood Shop. The following Shop Safety Class is required to access the hand tools
¶ Machine Reservations
The cutter is available on a first-come first-serve basis.
¶ Before You Begin
Personal Protective Equipment (PPE):
• Sturdy, close-toed shoes must be worn at all times.
• Long hair, jewelry, and loose clothing must be tied back.
• Safety glasses and earmuffs must be worn while machines are running.
For more information on shop safety visit Wood Shop under "Safety."
Be careful when handling glass. The edges can be sharp.
Always keep your fingers, hands, arms, etc out of the path of the blade. Always work on a steady surface.
¶ Time to complete
- Variable
¶ Tools Required
¶ Materials Required
¶ Instructions
Fletcher has disavowed the Mode l7554 so here's a manual for the 3000 series which is similar.
¶ Maintenance
Wipe dust off rails with a cloth.
Oil glass cutting wheel bearing.
¶ Troubleshooting
¶ References
Fletcher has disavowed the Mode l7554 so here's a manual for the 3000 series.